Serving You Since 1988

Big Bend

At Big Bend Trailers, we have been using gooseneck trailers on our ranches for over 40 years. We operate ranches in about five different counties of West Texas (The Big Bend Area). The country is big, and it takes a lot of acres per cow.

Therefore, we pull many trailers, many miles over a lot of rough roads, and it is pretty tough on trailers and equipment. We have spent a good deal of time fixing and repairing trailers over the years and have come up with some ideas to make the trailers more durable. These ideas and years of hands on experience have been incorporated into our Big Bend Trailers.

I think you will find our trailer a very tough, practical trailer that you can use even in the harshest of conditions and it will hold up for you. To learn more about Big Bend Trailers and what we do, go to our website by clicking the link below.

Showing1-2 of 2 items
  • Page:
  • 1
New 2017 Big Bend 18x68FT 18' x6'8" Livestock Trailer Vin38330

New 2017 Big Bend 18x68FT 18' x6'8" Livestock Trailer Vin38330

Price: $15,495.00 | For sale in ACAMPO, CA

Need a tough stock trailer to get you where you're going? BIG BEND trailers is the way to go! This is an 18X68FT model, which is an 18' long, 6'8" wide and 7' tall, tarp top stock trailer with 4' tall sides. The livestock area is 18'. These trailers are VERY durable, beefed up stock trailers to handle the roughest territory. The bottom frame of the trailer is built with 2x4 rectangle tubing which is stronger than normal goosenecks that use angle iron. Sides are built with solid steel and rectangle tubing so there are no places for water and manure to accumulate and rust out. Each of the runners under the floor are 2.5" x 2.5" square tubing welded solidly into the frame. For an easier ride it comes with two 7k torsion axles with upgraded 14 ply radial tires on a 16" steel wheel. Also there are NO exposed wires for trailering in rough brush environments. These stock trailers have full powder coating on the interior and exterior of the trailer, and have Rhino liner on the front, behind the tires and in front of the brush fender to protect it from gravel, mud, and water. Standard this trailer has a quick coupler for easy hooking up. This particular Big Bend trailer has a tarp top, rubber mats and an added locking tool box on the driver's side AND the roller pins on the rear of the trailer for getting smoothly through rough terrain. It comes with butterfly gates on the back with an easy slam latch. The center gate is a full width gate with a sorting gate and they include easy slam latches too. There is an extra-large 48" curb side escape door up front. At the bottom of the walls is a gap in between the wall and floor. This creates a space that lets manure and urine drain out, there will never be manure building up in the corners causing potential rust problems with this trailer. This gap also makes cleaning the trailer a quick and simple process. Just rinse the manure out the sides. The GN nose area has two small swinging calf gates to access the storage area there. Big Bend trailers are not a typical stock trailer. They are meant to last a long time and take a beating. They were designed by ranchers to withstand going down a rough back country road with livestock, but have a classy look to have the ability to be used for horse. Call for more information. Financing is available.

Stock #: B38330
2016 Big Bend 18' Half Top Gooseneck Stock Trailer Vin: 33425

2016 Big Bend 18' Half Top Gooseneck Stock Trailer Vin: 33425

MSRP: $14,295.00 | Price: $12,995.00 | For sale in ACAMPO, CA

SAVE $1300! REDUCED FROM $14295! Need a tough stock trailer to get where you're going? BIG BEND trailers is the way to go! This an 1868DAHT model, which is an 18' long, 6'8' wide, half top trailer with 4' high sides. These trailers are VERY durable, beefed up stock trailers. The bottom frame of the trailer is built with a 2x4 rectangle tubing, which is stronger than normal goosenecks that use angle iron. The sides are built with solid steel and rectangle tubing, so there is no place for water and manure to accumulate and rust out. Each of the runners under the floor are 2.5" x 2.5" square tubing welded solidly into the frame. For an easier ride, it comes with two 7k torsion axles with 10 ply radial tires on a 16" steel wheel. Plus, there are NO exposed wires for trailering in rough brush environments. These stock trailers have full powder coating on the interior and exterior of the trailer, and have a spray liner on the front to protect it from gravel, mud, and water. Standard, this trailer has a quick coupler for easy hooking up. This particular Big Bend trailer has a half top, and comes equipped with Lazy L's to pull in stubborn stock. It has butterfly back gates, with an easy slam latch. The center gate has a sorting gate, which also includes easy slam latches. There is a curb side escape door up front. At the bottom of the walls there is a gap between the wall and the floor. This creates a space that lets manure and urine drain out, and also makes cleaning the trailer a quick process. This trailer comes standard with rubber mats. This trailer also comes with a lockable toolbox on the driver side front corner under the fender. In the nose of the trailer, you will find two saddle racks, as well as bridle hooks and space to put other equipment. Big Bend trailers are not your typical stock trailer. They are meant to last a long time and take a beating. They were designed by ranchers to withstand going down a back country road with livestock, but still maintain a classy look. Call for more information, Financing is available.

Stock #: 33425
Showing1-2 of 2 items
  • Page:
  • 1

Get a Quote

Please enter your contact information and one of our representatives will get back to you with more information.